(1) In the new release, you can apply an initial configuration template to all AP180 series devices in an Apartment network.
(2) If an initial configuration template has been applied to the device, Yes will be shown in the initialized column in the AP List.
(3) When adding or editing an Apartment network, you can decide whether to apply an initial configuration template to all AP 180 series devices in the network when they are connected to the JaCS for the first time. It should be noticed that the configurations are automatically applied to the devices once only.
In the new release, you can use the provided template to set specific configurations for devices. Up to 200 templates are supported.
In the new release, the supported RF of a device will be displayed when you hover the mouse over the SN of a device.
In the new release, you can click MAINTENANCE > LOGS > Settings Log to check the device-specific configuration logs.
In the new release, a Detect button for link detection is added in the pop-up window in the Topology page. You can click it to detect the status of a physical link. Three detection results may occur, including normal link, link failure and no link.
After completing the operation, you can click MAINTENANCE > LOGS > Operation Log to check the log.
| No. | Bug Description |
|---|---|
| 1 | MA2810 V1: No record existed in the Client List on JaCS when a mobile phone went offline. |
| 2 | If Web CLI permission is enabled for an existing admin account, the permission of account can not be disabled. |
| 3 | In the Hotel scenario, CLI commands with slashes (/) and periods (.) were not allowed to be entered in the Advanced Settings in the Basic setting page. |
| 4 | Some sub accounts, such as admin, employee and guest, could not use Web CLI to check fixed commands. |
No. | Module | Description |
1 | Device | Up to 200 devices can be imported each time. To import more than 300 devices, users need to do it in batches. |
2 | Configuration | Configurations of up to 200 devices can be imported each time. To import configurations of over 200 devices, users need to do it in batches. |
3 | EXCEL template | For Excel template, only the XLS format is supported. |
4 | SSID | SSIDs can be made up of numbers, English letters, and “-“. |
5 | Custom excel template | In an Excel customized template, A to Z columns and 1 to 15 rows are supported. |
6 | AP | Account-based policies may fail on some models, such as AP680(CD), where they are disabled by default. In this case, users need to batch apply from the Cloud the web-auth acct-update-interval 1 command to enable those policies. |
7 | SSID reverse sync | The Cloud does not support SSIDs containing special characters. If set on end devices, such SSIDs will fail to be delivered, after synchronization, by the Could. |
8 | 00000JAPAN Wi-Fi | In the Apartment Scenario, if the device goes offline after 00000JAPAN Wi-Fi is enabled, and then goes online after 00000JAPAN Wi-Fi disabled, Cloud will not re-configure the Wi-Fi settings on device. You need to clear 00000JAPAN Wi-Fi configuration manually. |
9 | AP | In Non-apartment Scenario, please clear the configuration on devices except AP180 before bring them online; otherwise, the configuration on devices may be conflict with that on Cloud, and the client may not be able to access the Internet. |
10 | AP | In Non-apartment Scenario, if the working mode (bridge mode or routing mode) of AP180 is different from that on Cloud, the client may not be able to access the Internet. |
11 | TOPOLOGY |
|
12 | TOPOLOGY | The uplink ports of some switches cannot be shielded in the topology as the Cloud fails to identify them. Included: XS-S1930J-8GT2SFP, XS-S1930J-8GT2SFP-P XS-S1930J-18GT2SFP, XS-S1930J-18GT2SFP-P XS-S1930J-24GT4SFP/2GT, XS-S1930J-24GT4SFP/2GT-P XS-S1930J-48GT4SFP |
13 | Initial Configuration Template | The template can only be applied to AP180 series access points in Apartment networks. |
全部评论