No.

Description

1

After the S1930 switch goes online, CLI will print the error message: /sbin/maccmng.sh: line 1: arithmetic syntax error

2

If Web CLI permission is enabled for an existing admin account, the permission of account can not be disabled. 

3

When the SSID named “00000JAPAN” is imported, the prompt is improper. 

4

When a rule is imported to an apartment network, two prompts will be displayed if the position is repeated. 

No.

Module

Description

1

Device

Up to 300 devices can be imported each time. To import more than 300 devices, users need to do it in batches.

2

Configuration

Configurations of up to 200 devices can be imported each time. To import configurations of over 200 devices, users need to do it in batches.

3

EXCEL template

For Excel template, only the XLS format is supported.

4

SSID

SSIDs can be made up of numbers, English letters, and “-“.

5

Custom excel template

In an Excel customized template, A to Z columns and 1 to 15 rows are supported.

6

AP

Account-based policies may fail on some models, such as AP680(CD), where they are disabled by default. In this case, users need to batch apply from the Cloud the web-auth acct-update-interval 1 command to enable those policies.

7

SSID reverse sync

The Cloud does not support SSIDs containing special characters. If set on end devices, such SSIDs will fail to be delivered, after synchronization, by the Could.

8

00000JAPAN Wi-Fi

In the Apartment Scenario, if the device goes offline after 00000JAPAN Wi-Fi is enabled, and then goes online after 00000JAPAN Wi-Fi disabled, Cloud will not re-configure the Wi-Fi settings on device. You need to clear 00000JAPAN Wi-Fi configuration manually.

9

AP

In Non-apartment Scenario, please clear the configuration on devices except AP180 before bring them online; otherwise, the configuration on devices may be conflict with that on Cloud, and the client may not be able to access the Internet.

10

AP

In Non-apartment Scenario, if the working mode (bridge mode or routing mode) of AP180 is different from that on Cloud, the client may not be able to access the Internet.